Gridwiz CCS Tester
EV Simulator for CCS EVSE Development
GRIDWIZ CCS TESTER is an advanced EV Simulator designed to facilitate communication between EV Chargers and Electric Vehicles (EVs) in accordance with the DIN SPEC 70121 and ISO 15118 standards.
| Item | Description |
|---|---|
| CCS Tester |
Electric Communication Controller / Supply Equipment Controller
Signal Level Attenuation Characterization (SLAC) PWM Detection and Control Pilot state Transition in accordance with IEC 6185101 Simulate AC/DC Charging Sequences Based on ISO 15118 Standards Provides Data Export Functionality for EV Charger Testing |
| PLC Technology | HomePlug Green PHY (IEEE 1901 BPL) |
| CCS Standard | DIN SPEC 70121, ISO 15118 |
| Interface (Expansion) |
CP, PE (PLC communication interface) USB (Exporting Test data) LAN / WAN (Internal / External Ethernet) CCS Type 1 Inlet ( Optional: CCS Type 2 Inlet) |
| Dimension | 471 x 391 x 191 (Wx L XH, mm) |
| Display | Touch 7 inch display |
| Power | AC 110 - 240 V |
EV Simulator for CCS EVSE Development
GRIDWIZ CCS TESTER is an advanced EV Simulator designed to facilitate communication between EV Chargers and Electric Vehicles (EVs) in accordance with the DIN SPEC 70121 and ISO 15118 standards.
This cost-effective solution integrates an EVCC and BMS Simulator, allowing for accurate testing and simulation without requiring a physical EV. It is ideal for testing communication protocols during charger development, maintenance, and product inspection.
Additionally, GRIDWIZ CCS TESTER features a built-in touch display, enabling easy configuration and real-time monitoring of charging sequences and communication status. This intuitive interface enhances usability and ensures precise control throughout the testing process.
The user can check the following data in each charging sequence:
- PWM signaling based on IEC 61851 (CP duty, CP voltage)
- SLAC sequence for PLC association of HomePlug Green PHY standard
- HLC (High Level Communication) of charging protocol for data communications
PWM Signal
| PWM Signal | |||||
|---|---|---|---|---|---|
| Parameter | Conditions | Min | Typ | Max | Unit |
| Frequency | Tolerance 0.5% | - | 1 | - | kHz |
| Duty Cycle | Tolerance 1% | - | 5 | - | % |
| Voltage Level | Tolerance ±0.6V | - | ±12 | - | V |